Author Topic: workshop insulation ?(& shop build diary)  (Read 23484 times)

ja2on

  • Guest
Re: workshop insulation ?
« Reply #25 on: March 20, 2009, 05:58:23 PM »
I could not wait until the weekend to start so I cracked on and started the partition after work  :dremel:


bogstandard

  • Guest
Re: workshop insulation ?(& shop build diary)
« Reply #26 on: March 20, 2009, 06:31:45 PM »
Don't forget Jason,

Loads of good storage in the roof space for very little outlay.

John

ja2on

  • Guest
Re: workshop insulation ?(& shop build diary)
« Reply #27 on: April 02, 2009, 03:50:34 PM »
nearly there but no piccies yet I just wanted to say that insulating the roof with rock wool is going on my list of jobs I never want to do again  :D

Offline shoey51

  • Full Member
  • ***
  • Posts: 214
Re: workshop insulation ?(& shop build diary)
« Reply #28 on: April 09, 2009, 07:19:11 PM »
nearly there but no piccies yet I just wanted to say that insulating the roof with rock wool is going on my list of jobs I never want to do again  :D
After crawling around in my roof space I would have to agree. it was 50C + in there when I was insulating with rockwool ::)

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: workshop insulation ?(& shop build diary)
« Reply #29 on: April 10, 2009, 02:06:14 AM »
nearly there but no piccies yet I just wanted to say that insulating the roof with rock wool is going on my list of jobs I never want to do again  :D
After crawling around in my roof space I would have to agree. it was 50C + in there when I was insulating with rockwool ::)

Graham,

We need the heat in.......... You need the heat out:scratch:

Opposite sides of the world...... Opposite problems.  :wave:

If only we could set up some sort of heat exchanger system......  :smart:

David.
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline shoey51

  • Full Member
  • ***
  • Posts: 214
Re: workshop insulation ?(& shop build diary)
« Reply #30 on: April 10, 2009, 03:36:49 AM »
heat exchanger system would be a great idea David but the distance is a killa :D

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: workshop insulation ?(& shop build diary)
« Reply #31 on: April 10, 2009, 03:46:41 AM »
heat exchanger system would be a great idea David but the distance is a killa :D


 :lol: :lol: :lol:
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: workshop insulation ?(& shop build diary)
« Reply #32 on: April 10, 2009, 09:20:03 AM »
heat exchanger system would be a great idea David but the distance is a killa :D


 :lol:   :lol:   :lol:   :lol:   :lol:   :lol:   :lol:
Good insulation would take care of that, but the cost would be the killa.
Route of the Black Diamonds

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: workshop insulation ?(& shop build diary)
« Reply #33 on: April 11, 2009, 07:39:05 AM »
nearly there but no piccies yet I just wanted to say that insulating the roof with rock wool is going on my list of jobs I never want to do again  :D
After crawling around in my roof space I would have to agree. it was 50C + in there when I was insulating with rockwool ::)

Graham,

We need the heat in.......... You need the heat out:scratch:

Opposite sides of the world...... Opposite problems.  :wave:

If only we could set up some sort of heat exchanger system......  :smart:

David.

What we need is a world wide pipe line for hot air. We could kill 2 birds with one stone.

1. warm the colder parts of the world thereby cooling the hotter parts of the world.

2. Have a ready made place to throw politicians. They are nothing but hot air anyway.

The distance might be a killa,

The cost might be a killa,

But, getting rid of the lieing, cheating thieving politicians,   PRICELESS!
 :lol:      :lol:      :lol:      :lol:      :lol:      :lol:

That is how I see it anyway.

Cheers :beer:

Don
« Last Edit: April 11, 2009, 01:24:06 PM by dsquire »
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

bogstandard

  • Guest
Re: workshop insulation ?(& shop build diary)
« Reply #34 on: April 11, 2009, 08:02:59 AM »
There there Don,

Don't lets get carried away, not all politicians are liars, cheats and thieves.

Some have died in the past few years. :lol:


Bogs

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: workshop insulation ?(& shop build diary)
« Reply #35 on: April 11, 2009, 09:05:52 AM »
There there Don,

Don't lets get carried away, not all politicians are liars, cheats and thieves.

Some have died in the past few years. :lol:


Bogs

You're right John, but some of them were so bad it takes many years for them to cool off to the point we can forget about them.

Cheers  :beer:

Don
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: workshop insulation ?(& shop build diary)
« Reply #36 on: April 11, 2009, 11:09:34 AM »
Makes me wonder how much heat we could get out of our current leaders! :D

Probably melt both polar caps. Then were would the polar bears be?

Bernd
Route of the Black Diamonds

ja2on

  • Guest
Re: workshop insulation ?(& shop build diary)
« Reply #37 on: April 13, 2009, 10:48:16 AM »
not much to show guys I have had a bad week with delly belly and now a rotten cold




I hope to finish painting this afternoon once I have watched the British superbikes on telly
Then I just have to wait for payday so I can build the benches.

Then it's swarf time  :dremel:  :ddb: :ddb: :ddb:

bogstandard

  • Guest
Re: workshop insulation ?(& shop build diary)
« Reply #38 on: April 13, 2009, 12:34:11 PM »
Very nice Jason.

A good touch, light walls a multiple flo tubes. Even though the walls do get dirty, it makes machining so much better, because of all the reflected, non directional light.

Bogs

ja2on

  • Guest
Re: workshop insulation ?(& shop build diary)
« Reply #39 on: April 25, 2009, 12:38:19 PM »
I have finally finished one bench  :hammer:


the sieg C4/chester commet was bl**dy heavy for a small lathe and it didn't help that a hit my knee cap with it as
we struggled to put it on the bench


And finally (I bought the c4 in February  :lol: )
I can begin the ritual of removing the red goo
 

bogstandard

  • Guest
Re: workshop insulation ?(& shop build diary)
« Reply #40 on: April 25, 2009, 12:57:19 PM »
That is looking great Jason.

That is going to end up as a mouthwatering workshop. Very few people can begin with a blank canvas as you have, and start off with the machines and equipment they really want in there.

I'll bet your fingers are twitching to get it all up and running.

Steve has one of those C4's and he is over the moon with it. Maybe he can give you some pointers on setting it up, as he has had it a fair while now and will know the shortcuts.

BTW, you should level the lathe, the wall socket can take care of itself  :lol:

Bogs
« Last Edit: April 25, 2009, 01:00:37 PM by bogstandard »

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: workshop insulation ?(& shop build diary)
« Reply #41 on: April 25, 2009, 01:54:56 PM »
That look a tidy set up you,re getting there I bet you can't wait to spoil it with swarf.

Have Fun

Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: workshop insulation ?(& shop build diary)
« Reply #42 on: May 02, 2009, 07:05:07 AM »
Looking good there Jason :thumbup:

It must be nice to start a shop from scratch? Making a home for everything instead of making everything fit in!

I can't help looking at all that space under the bench and thinking of the trays I used in mine....

Shameless link time..... http://madmodder.net/index.php?topic=395.0

They really do make multiple  :proj: afflictions work together!!  I stick a bit of tape on the front of each one  and write it's project on with a marker.... It's doing the job as planned :thumbup:

I'm quite intrigued to see where you go with the rest of this ?



That looks like a mighty fine lathe too.... Red goo, who was it termed it "dragons blood"?  Gutted John got in there with the level joke :lol: 
Anyway,

Looking forward to your first project post too  :dremel:   :thumbup: .



Ralph.

I know what I know and need to know more!!!