Author Topic: Duplicating a taper of a arbor  (Read 4728 times)

Offline SPiN Racing

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 505
Duplicating a taper of a arbor
« on: March 27, 2009, 05:50:48 AM »
I know there have been many posts mentioning the duplicating of a arbor taper.
I was compiling and cropping pictures and video of the Peck drill and put together a short clip of measuring the taper of a JT-33 Drill arbor.

I figured it can go here in the how to-s as it relates to what the guys have been explaining in various threads.

Feel free to move it if I have the wrong place for it!   :thumbup:

http://www.youtube.com/watch?v=mPShSNnNx70
SPiN Racing

Offline Twinsquirrel

  • Full Member
  • ***
  • Posts: 123
  • never rub another mans rhubarb
Re: Duplicating a taper of a arbor
« Reply #1 on: March 27, 2009, 05:53:50 AM »
nice one Spin, simple but effective :thumbup:

David
So many ideas, so little skill

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3520
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Duplicating a taper of a arbor
« Reply #2 on: March 27, 2009, 09:12:11 AM »
Well done that man  :thumbup:

Stew


A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4925
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Duplicating a taper of a arbor
« Reply #3 on: March 27, 2009, 01:30:25 PM »
Concise & to the point!  :clap:

David.
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!