Author Topic: Hello from pakrattuk  (Read 2455 times)

Offline Pakrattuk

  • Jr. Member
  • **
  • Posts: 13
Hello from pakrattuk
« on: June 14, 2014, 01:13:14 PM »
Hello all, been bitten by the machining bug again. Looking at upgrading my workshop so thought this forum looked like a good place to start. I've owned a small Emco compact 5 CNC lathe for a number of years but I'm now looking to upgrade the workshop with a Mill and possibly a larger lathe ( will probably keep the Emco as I can't bring my self to part with it). Hopefully might be able to make some sort contribution to the forum.
Thanks for having me as a member

Pakrattuk

Offline Jonfb64

  • Jr. Member
  • **
  • Posts: 80
  • Country: england
Re: Hello from pakrattuk
« Reply #1 on: June 14, 2014, 04:59:27 PM »
Hi and welcome :nrocks:

Jon

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: Hello from pakrattuk
« Reply #2 on: June 14, 2014, 06:26:38 PM »
Hi and welcome

Offline AussieJimG

  • In Memoriam
  • Sr. Member
  • *****
  • Posts: 381
  • Country: au
Re: Hello from pakrattuk
« Reply #3 on: June 14, 2014, 08:55:28 PM »
Welcome Pakrattuk, it looks like you are off to a good start

Jim

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6466
  • Country: us
  • Republic of Vermont
Re: Hello from pakrattuk
« Reply #4 on: June 14, 2014, 11:13:40 PM »
Hi Patrattuk, welcome to te forum!  :beer:
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg