Author Topic: Returning member  (Read 2907 times)

Offline Brian Rupnow

  • Full Member
  • ***
  • Posts: 228
Returning member
« on: August 01, 2014, 04:18:24 PM »
Hi Folks. I was a member on this forum quite some time ago, but didn't post a lot. I am a retired design engineer, and have been designing/building model steam and i.c. engines for about six years now. I have successfully built and ran seven steam engines and seven i.c. engines, and am currently designing a 1" bore side valve gasoline  engine that can (hopefully) be built from bar stock. I hope to be a good contributing member to the forum.---Brian Rupnow

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Re: Returning member
« Reply #1 on: August 01, 2014, 04:32:47 PM »
Welcome Back
Brian  :thumbup: :thumbup:
John

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5310
  • Country: us
Re: Returning member
« Reply #2 on: August 01, 2014, 05:14:50 PM »
Welcome back to the collective :borg:

Look forward to what you have going on.

Eric
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4949
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Returning member
« Reply #3 on: August 01, 2014, 06:05:49 PM »
Hello Brian.  :wave:

Nice to see you again. 

Looking forward to seeing your latest build.  :thumbup:

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline Artie

  • Sr. Member
  • ****
  • Posts: 293
  • Country: au
  • Down here in the Aussie sunshine/heat :-)
Re: Returning member
« Reply #4 on: August 01, 2014, 09:13:38 PM »
Ullo Brian, its been a while.... looking forward to your offerings....
South Wales, wait...NEW South Wales... Batemans Bay.

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Returning member
« Reply #5 on: August 01, 2014, 10:08:26 PM »
Hi Brian

Welcome back Brian.  :thumbup:

I'm just down the road from you in Kitchener. Lived in Newmarket and worked at Office Specialty as a draftsman in the 60's.

Look forward too hearing some more of your stories. I'm sure that every one will want to see some pictures of that yellow hot rod of yours.  :D :)

Cheers  :beer:

Don
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline tekfab

  • Full Member
  • ***
  • Posts: 133
Re: Returning member
« Reply #6 on: August 02, 2014, 06:34:54 AM »
Welcome back Brian,  I've followed your exploits on other sites and one of these days I'm going to attempt to make one of your clocks  (the easy one !)

Mike

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Re: Returning member
« Reply #7 on: August 02, 2014, 06:43:18 AM »
Hi Brian

                 Welcome back, I have seen many of your interesting contributions on other forums and look forward to your future posts on this forum again.
                                                        Cheers  David

Offline Brian Rupnow

  • Full Member
  • ***
  • Posts: 228
Re: Returning member
« Reply #8 on: August 02, 2014, 09:31:39 AM »
Tekfab--You may have me confused with someone else. I have never built a clock.---Brian

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2086
  • Country: gb
Re: Returning member
« Reply #9 on: August 04, 2014, 09:38:21 AM »
hi and welcume