MadModder

Gallery, Projects and General => Gallery => Topic started by: Ginger Nut on March 29, 2016, 01:21:34 AM

Title: Did my Block's
Post by: Ginger Nut on March 29, 2016, 01:21:34 AM

I had an off cut from the V-Blocks I made it had an almost 60^ angle on it. So with help of a mate who squared and touched up the angle I split it in two to give me a set of 60^ angle blocks. Still a little rough looking but accurate enough for what I will use them for for now. Holes drilled so they will line up using a 6m shaft or T-botls to crosslside.

Title: Re: Did my Block's
Post by: Brass_Machine on March 29, 2016, 03:04:17 PM

Nice. V blocks are always handy... I am always wishing I had a decent set!!