MadModder

The Shop => Wood & Stuff => Topic started by: Stephenwp on March 22, 2012, 08:13:29 AM

Title: Jointer Knife Jig
Post by: Stephenwp on March 22, 2012, 08:13:29 AM

Here is a jig I made for setting jointer knives.

(http://shopngarage.com/blog/wp-content/uploads/2012/03/FinishApplied.jpg)
(http://shopngarage.com/blog/wp-content/uploads/2012/03/JointerKnifeJig.jpg)

Title: Re: Jointer Knife Jig
Post by: bvd1940 on March 22, 2012, 06:00:34 PM

Real nice job Stephenwp  :beer: thanks for sharing. :D

Title: Re: Jointer Knife Jig
Post by: Rob.Wilson on March 22, 2012, 06:42:25 PM

 :clap: :clap: :clap:  nicely done  Stephenwp   :dremel:


Rob

Title: Re: Jointer Knife Jig
Post by: krv3000 on March 22, 2012, 08:18:16 PM

yep well dun

Title: Re: Jointer Knife Jig
Post by: Stilldrillin on March 23, 2012, 04:34:00 AM

Don't know what jointer knives are.....  :scratch:

But, the setting jig is a very nicely made tool! :thumbup: :clap: :clap:

David D

Title: Re: Jointer Knife Jig
Post by: John Rudd on March 23, 2012, 05:20:46 AM

Looks like the blade from a bench planer?

Nice looking tool for setting the blades.. :thumbup:

Title: Re: Jointer Knife Jig
Post by: DavidBraley on March 23, 2012, 10:38:12 AM

Man, that is nice! Made from Red Oak too. I like that brass shoe you put on the bottom. Nice touch.

Wood is Good!