MadModder
Home Base => Introductions => Topic started by: Peter Cordell on April 05, 2017, 03:44:10 PM
-
I have recently acquired a lathe, or two, seem to have grown to three now.
Which is a little company for my mini mill and grinder. Did I mention the shaper, another must have item.
All this has given me a good excuse to turn perfectly good metal into swarf.
-
Hi Ben, welcome to the forum :wave:
I see from your other posting that you might join us on the Scraping Course in December at my place - that would be good :thumbup:
-
:wave: :wave: Hi Ben
-
Welcome a board David
-
Welcome Ben. :wave:
-
Thanks for the welcome Andrew,jon,David ,Biggles
Andrew yes really looking forward to this
Ben
-
Hi Ben
welcome from Yorkshire! Sadly December's too crowded for me already so I'll have to listen to you all getting blisters etc :drool:
Ian