MadModder
Gallery, Projects and General => How do I?? => Topic started by: Bangkok Mick on May 06, 2013, 11:19:25 PM
-
Hi Modders,
Having recently acquired a new 7”x 14” Sieg lathe I am considering an engine build from castings and have been looking at the Stuart range.
The 10V looks like an engine I could construct on this lathe, however I already own a 10V and a 10D so considering other models.
My question is would it be harder to build one of the larger similar design engines such as the 7A and would the lathe I have be big enough for the project.
Any advice from members experienced with these engines would be appreciated.
Cheers Mick