MadModder

Home Base => Introductions => Topic started by: oxocube on December 02, 2017, 09:54:20 AM

Title: Hello from Chester in the UK
Post by: oxocube on December 02, 2017, 09:54:20 AM

Hello to everyone and thanks for the add. I am a retired cabinetmaker and budding engineer, I have had many lathes over the years and have recently obtained for little money a Mashtroy Troyan C210T (Warco 220) that apart from flaking paint work on the stand looks like new. I am a life long biker and have several heavy cruisers that i customize and that is where the lathe comes in handy. I hope i can pick up some tips and advise on here and maybe pass some on. Regards Bill.

Title: Re: Hello from Chester in the UK
Post by: Meldonmech on December 02, 2017, 01:20:04 PM

 Hi Bill
              Welcome to MadModder, there are many motorcyclist who contribute to the Forum. We look forward to seeing
 some of the cruisers you have customised.
                                                                 
                                                   Cheers David

Title: Re: Hello from Chester in the UK
Post by: Biggles on December 17, 2017, 04:06:09 AM

Hi and Welcome Bill.

Title: Re: Hello from Chester in the UK
Post by: krv3000 on December 17, 2017, 05:05:59 PM

hi and welcome