MadModder
The Shop => Tools => Topic started by: celsoari on January 16, 2018, 04:28:26 PM
-
How i made my torch:
&t=54s
greeting from Brazil
Celso Ari
-
That works quite well thanks for showing.
-
That works quite well thanks for showing.
Thanks Tom
-
Did anyone notice the state of the table on his pillar drill? :bugeye:
-
Did anyone notice the state of the table on his pillar drill? :bugeye:
I've seen worse!
I once went to look at a Fobco drill and the table was in two pieces. A piece of 3mm aluminium held the two parts together. Needless to say, I didn't buy it.
-
Did anyone notice the state of the table on his pillar drill? :bugeye:
So what?
-
Hi Celso
Some good ideas on this torch, and made mostly from off the shelf stock items. Easy to make for any one with limited machinery.
Well Done
Cheers David
-
Hi Celso
Some good ideas on this torch, and made mostly from off the shelf stock items. Easy to make for any one with limited machinery.
Well Done
Cheers David
thanks Mr. David
greetins from Brazil
Celso Ari