MadModder
The Shop => Tools => Topic started by: sbwhart on February 16, 2018, 01:54:04 AM
-
I came across the design for this depth gauge in a 1920 ish American Machinist magazine, it can be use with one hand.
(https://i.imgur.com/zhAZtisl.jpg?1)
(https://i.imgur.com/HR5ssSAl.jpg?1)
(https://i.imgur.com/56FPW6Hl.jpg?1)
You can salvage a spring from a liquid soap dispenser
(https://i.imgur.com/Fh9RjQWl.jpg)
to use simple press the rod to depth
(https://i.imgur.com/qc9EOgol.jpg?1)
then with your caliper zeroed on the bar, simply take the direct measurement of the rod
(https://i.imgur.com/3sqbLy2l.jpg?1)
I've attached the drawing if you want to make one
Stew
-
Hi Stew
Another useful tool, I have down loaded the drawing.
Thanks David