MadModder
Gallery, Projects and General => How do I?? => Topic started by: snub on April 07, 2017, 06:55:06 PM
-
They look like an onion, or the roof of the Taj Mahal. I built this after looking at the one that Repton sells. Perhaps there is a design flaw?
-
It looks to me as though you haven't set the distant correctly :scratch: See attached :thumbup:
-
The tool tip has to be dead on centre height. If not it turns a conic shape.
That's how you machine aeroplane propeller spinners.
HTH Will
-
That's how you machine aeroplane propeller spinners.HTH Will
That's what I love about this site :scratch: :scratch: You learn something new everyday :nrocks:
-
That would be the Taj Ma Quadcopter then....
-
Hmmmmm...the center height appears to be spot on. I'm wondering if maybe the cutting tip is not in the same plane as the pivot, if that would cause this. I will fiddle with it some more.
-
It's simple, the radius you set your tool to swing at has to be the radius of the bar you're cutting. You're tool swing radius is greater.