MadModder

Home Base => Introductions => Topic started by: cloud9rich on November 05, 2014, 07:44:21 PM

Title: Hello again...
Post by: cloud9rich on November 05, 2014, 07:44:21 PM

I'm logged back in after too long away :clap:  I have just bought a Hobbymat lathe, actually badged as a Soupe SD300 after buggering about with allsorts for too long.  This is a cracker, almost unmarked and little used.  After a bit of cleaning up and adjusting it is so tight and sure, I'm all fired up again!  And I find John Mills (doubleboost) on here too, one of my very favourite YT sources of info and entertainment.  So,lots to learn and talk about.  :beer:  Cheers, Rich :wave:

Title: Re: Hello again...
Post by: dawesy on November 06, 2014, 03:33:32 AM

Hi rich. Welcome back :)

Title: Re: Hello again...
Post by: DavidA on November 06, 2014, 07:18:35 AM

Good to see you around again.

And don't forget the pictures.

Dave. :wave:

Title: Re: Hello again...
Post by: Meldonmech on November 06, 2014, 08:08:02 AM

 Hi

                                         Welcome back

                                                                Good Luck with the new Lathe
                                                                                                                       Cheers David

Title: Re: Hello again...
Post by: krv3000 on November 07, 2014, 04:14:32 PM

hi and welcume

Title: Re: Hello again...
Post by: spuddevans on November 08, 2014, 08:41:18 AM

Hello and welcome

Tim