MadModder
Gallery, Projects and General => Project Logs => Topic started by: jonesie on May 15, 2011, 01:48:11 PM
-
i am finishing my jerry howell farmboy and need a small compression spring. it needs to be .093 outside dia. .104 max. and can be .008 or .010 dia. wire 1/2 inch long. i know i could make one but i do not have the wire . i would like to buy 2 or 3,here in the u.s. thanks jonesie
-
i am finishing my jerry howell farmboy and need a small compression spring. it needs to be .093 outside dia. .104 max. and can be .008 or .010 dia. wire 1/2 inch long. i know i could make one but i do not have the wire . i would like to buy 2 or 3,here in the u.s. thanks jonesie
Ballpoint pen spring?
-
I just pulled a Scripto brand disposable cigarette lighter apart, looks like it'll fit you needs, .092 OD, wire size .011" about .900" long , I'm guessing most lighters will have about the same size spring.
.
-
thanks stovebolt i will check it out. pen springs are to big on the o.d., thanks again jonesie