MadModder

Gallery, Projects and General => Neat Stuff => Topic started by: AdeV on April 17, 2012, 01:12:48 PM

Title: Gear cutting with a shaper
Post by: AdeV on April 17, 2012, 01:12:48 PM

Someone (guilty) had too much time on his hands today...


Found: One document explaining how to cut a true involute gear wheel of any number of teeth, using a shaper & a single cutter.

Now all I need is the shaper....

Title: Re: Gear cutting with a shaper
Post by: mattinker on April 17, 2012, 03:47:03 PM

There was a long thread on the

http://finance.groups.yahoo.com/group/Metal_Shapers/

group about ten to twelve years ago, John Stevenson was involved, a very interesting thread!

Regards Matthew