MadModder

Gallery, Projects and General => How do I?? => Topic started by: Hoss on January 06, 2020, 01:09:25 AM

Title: Help please mini Bonelle II
Post by: Hoss on January 06, 2020, 01:09:25 AM
 :bang: Help! I am trying to obtain a set of prints in order to build a mini Bonelle II. Please help with information. Thanks for your time.
Title: Re: Help please mini Bonelle II
Post by: Joules on January 06, 2020, 03:35:51 AM
Have you tried joining the Quorn owners group and asking there.  It used to be the Yahoo group and the 3D model was possibly in the archive back then.

I post this link for others to see what the Bonelle Mini II is.

http://www.metallmodellbau.de/MINI_BONELLE_II.php

https://groups.io/g/Quorn-Owners
Title: Re: Help please mini Bonelle II
Post by: WeldingRod on January 10, 2020, 07:54:09 PM
Hoss is on the ball ;-)
I've seen his question on the Quorn group too...

Sent from my SAMSUNG-SM-G891A using Tapatalk

Title: Re: Help please mini Bonelle II
Post by: Hoss on January 22, 2020, 12:50:15 AM
 :bang:     still trying to obtain the prints for the Mini Bonelle II     so far no luck!
Title: Re: Help please mini Bonelle II
Post by: Nuzbraggs on January 22, 2020, 09:00:25 AM
Hi Hoss
I am a novice at replying so be kind if I stuff up. I have a set of drawings of a "AO Bonelle TCG Drawings Metric" in the form of a Pdf. The usual reply is "Send me you email and I will forward to you the requested drawings". Not sure how to send stuff nor the emails bit. Anyhow here goes.
Kind Regards......Nuzbraggs.   
Title: Re: Help please mini Bonelle II
Post by: John Rudd on January 22, 2020, 10:49:32 AM
Nuzbraggs,
It might be best if hoss sends you a private message containing his email address, to which you send the pdf drawings.
You should receive a  notification that you have a new message when you revisit the site.
It will appear in "my messages" at the top of the page..