MadModder
The Shop => Metal Stuff => Topic started by: Rob.Wilson on April 24, 2010, 09:37:27 AM
-
Hi Lads
When mooching around a scrap yard , i found just what i had been looking for , A 10' U bend ,8" tube :) , only needing 1/2 of the U shape , i got it burnt up, stuck it in the van and off i went , very happy with my lump of tube , the wife was less impressed with my new fined , as i came back from the yard with more junk than i had taken , :lol: :lol: :lol:
I had to cut the tube into three , cos even with viagra i would not get it up myself , just a tad heavy , any way its a chimney for my furnace , i have been messing about on and off for a year with my furnace getting it so i can run it in doors , the weather in the north of england is not the best .
Hope it works as i tend to melt more than the pot full of metal ::)
(http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1020104.JPG)
(http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1020105.JPG)
(http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1020106.JPG)
Cheers Rob
-
Here is a shot of my furnace that i have been working on , what the chiney connect to :)
(http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P8210086.JPG)
(http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P8210087.JPG)
Cheers Rob
-
Nice work there Rob. That is a a beefy looking furnace. Did you make that too?
Eric
-
Did you weld those numbers on Rob?
Very methodical :smart:
-
Gee, Rob, I wish you would do a job half cocked just once in a while, so the rest of us could feel a bit more adequate!
; )
; )
Very nice install job on the chimney. Very nice looking "little" metal cooker you have there, too!
Thanks for the pics.
Dean
-
Gee, Rob, I wish you would do a job half cocked just once in a while, so the rest of us could feel a bit more adequate!
; )
; )
My thoughts exactly :ddb:
-
Gee, Rob, I wish you would do a job half cocked just once in a while, so the rest of us could feel a bit more adequate!
Somehow I erally dont think THATS gonna happen anytime soon.. :bow: He does do grand work doesnt he..oh sorry Rob, shouldnt talk about you on your own thread.... Seriously mate I find your stuff an inspiration, thanks to you im looking for a shaper.
Had a meeting with the guy I share a shed with and he wanted to know just WHERE I would put it..... if we squeezed this mill over...move the lathe a little to the left..and ....
Rob T (as opposed to Rob W)
-
Many thanks Lads , for your comments :nrocks:
Hi Eric , i did make the furnace ,, done a quick post on it http://madmodder.net/index.php?topic=3027.0
Hi Darren , yep i welded the numbers on ,and the date i stuck the thing up ,,,,,,,,,,the things you do when your off work ::)
Many thanks Rob
-
Hi Rob,
I found your thread a complete dissapointment.
A 70 years old guy,
George
-
George,
He always makes me feel very inferior....... ::)
David D
-
Well..... at seventy...finding the thread about a new erection was really about a chimney, may well give you cause for dissapointment..... :) :lol:
-
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: sorry George :lol: :lol: :lol: :lol: :lol: :clap: :clap: :clap:
Hi Rob,
I found your thread a complete dissapointment.
A 70 years old guy,
George
Regards Rob :thumbup: