MadModder
Gallery, Projects and General => Gallery => Topic started by: Jasonb on January 07, 2012, 01:33:29 PM
-
Well I have spent a bit of time fiddling about with this one since the new year and have progressed from the odd pop through a couple of bangs to whats almost running. Most of the issues were with the ignitor but after a few rewound springs, a few more guesses of the parts that I could not read on the drawing playing with the dwell time and trip lever not to mention a sore finger from continually flicking it over its about right.
I'm not running it with the water pump at the moment so have kept down to a couple of 5min runs and will now pack it up ready to return to the guy I made it for, hopefully once he has it painted up and on a cart I'll get some photos and post them here.
Sorry the video is the wrong format, it is a Vertical engine honest
http://smg.photobucket.com/albums/v156/jasonballamy/Hit%20n%20Miss/?action=view¤t=VIDEO0013.mp4
Full build detais over on HMEM (http://www.homemodelenginemachinist.com/index.php?topic=10542.0) if you are interested
J
-
Great job Jason :bow: :bow: :bow: :bow:
The engine dose have a good crack to it :clap: :clap: i followed the engine build on HMEM ,,, stunning craftsmanship and eye for the detail as always :med:
Rob
Video format is ok on a laptop :med:
-
Crackin' engine Jason! :thumbup:
Runs very well....... :clap: :clap:
David D
-
Very nice, Jason. That's one of my favorite engines.
Chuck