MadModder

Gallery, Projects and General => Gallery => Topic started by: Ginger Nut on October 20, 2015, 11:49:08 PM

Title: Lathe Adaptor
Post by: Ginger Nut on October 20, 2015, 11:49:08 PM

I am into wood turning and have 2 lathe a Nova 3000 which has a 30mm x 3.5 spindle thread a Jet Mini which has an 1" x 10tpi changing chucks and or main chuck adaptors is ARPIA. So I made an adaptor to fit the Nova and step down to the jet 1" x 10tpi.

This was my first attempt to set up machine cut thread since leaving school at 16yrs  :Doh:

Material is 4140.

Video running

Title: Re: Lathe Adaptor
Post by: howsitwork? on November 29, 2015, 04:54:46 PM

Nice !

Good to find you on here as well.

Ian