MadModder

Gallery, Projects and General => The Design Shop => Topic started by: sbwhart on January 26, 2013, 04:25:51 AM

Title: Potty Mill Engine
Post by: sbwhart on January 26, 2013, 04:25:51 AM

Just finished drawing up a simple mill engine, I've tried to design it so that it can be made using a lathe and a drill, no milling is required.

I've also tried to make it so that the cylinder can be used in other engine configurations.

I wont be making this engine for quite some time as I'm going to be concentrating on other things but if any one wants a PDF copy of the drawing just send me a PM with yur email adress and I'll send them a copy.

Attached is the assembly drawing

Stew

Title: Re: Potty Mill Engine
Post by: Stilldrillin on January 26, 2013, 08:07:09 AM

Thanks Stew!  :beer:

I reckon I could manage to build one of those, eventually.......  :thumbup:

Good luck, with your, "other things".  :)

David D

Title: Re: Potty Mill Engine
Post by: John Rudd on January 26, 2013, 12:20:15 PM

I'd love to build one too...pm sent.

Thanks Stew...