MadModder

The Craftmans Shop => PowerSports => Topic started by: doubleboost on October 17, 2015, 04:58:18 PM

Title: Bigger shocks with a bit of "negative camber"
Post by: doubleboost on October 17, 2015, 04:58:18 PM
Ford Focus mk1 uprights modified for rally use
(http://i261.photobucket.com/albums/ii63/john970s0/S1040010_zpsbdrzijei.jpg) (http://s261.photobucket.com/user/john970s0/media/S1040010_zpsbdrzijei.jpg.html)

(http://i261.photobucket.com/albums/ii63/john970s0/S1040007_zpsfgs2yp0d.jpg) (http://s261.photobucket.com/user/john970s0/media/S1040007_zpsfgs2yp0d.jpg.html)

(http://i261.photobucket.com/albums/ii63/john970s0/S1040008_zpsvshmhjxm.jpg) (http://s261.photobucket.com/user/john970s0/media/S1040008_zpsvshmhjxm.jpg.html)

(http://i261.photobucket.com/albums/ii63/john970s0/S1040009_zpsaahuk0zr.jpg) (http://s261.photobucket.com/user/john970s0/media/S1040009_zpsaahuk0zr.jpg.html)

(http://i261.photobucket.com/albums/ii63/john970s0/S1040011_zps48cjnvik.jpg) (http://s261.photobucket.com/user/john970s0/media/S1040011_zps48cjnvik.jpg.html)
Title: Re: Bigger shocks with a bit of "negative camber"
Post by: micktoon on October 17, 2015, 05:59:14 PM
Hi John , looks like that angle plate did the job then  :thumbup:, hope it was easier than you thought  :clap:

 Cheers Mick
Title: Re: Bigger shocks with a bit of "negative camber"
Post by: awemawson on October 17, 2015, 06:02:05 PM
Classic case of the setting up taking ten times as long as the machining I reckon 
Title: Re: Bigger shocks with a bit of "negative camber"
Post by: doubleboost on October 17, 2015, 06:11:12 PM
The adjustable angle plate made the set up not too bad
I was going to tilt the head on the mill
I was on about 1 hour setting it up
John
Title: Re: Bigger shocks with a bit of "negative camber"
Post by: krv3000 on October 17, 2015, 07:05:48 PM
good one john
Title: Re: Bigger shocks with a bit of "negative camber"
Post by: tom osselton on October 17, 2015, 08:30:36 PM
Nice angle plate ( another thing to buy )