MadModder

Gallery, Projects and General => Oooops! => Topic started by: Pete49 on June 12, 2016, 02:54:46 AM

Title: 2560 board dead
Post by: Pete49 on June 12, 2016, 02:54:46 AM
Last night while doing a simple print my kit printer stopped and the screen went blank.  :zap: Checked the power unit and its good but when I checked the board it had power in and the 2 fuses are good and have power out but its not working. I looked at the various circuits but didn't see obvious signs of blown bits. I have another board on the way but am worried it may happen again. Any ideas on what to check? I checked the motors and end stops for shorts but they're all ok. It might just be a dodgy board but then who knows.
Pete