MadModder

Gallery, Projects and General => Gallery => Topic started by: krv3000 on February 26, 2012, 06:01:56 PM

Title: a wot not
Post by: krv3000 on February 26, 2012, 06:01:56 PM

HI i made this up today sum pics

Title: Re: a wot not
Post by: krv3000 on February 26, 2012, 06:11:05 PM

OK the rest of the pics its for cleaning out the Morse taper on the lathe Head the brush it self started out as a brush for cleaning  drinking glasses but the Handel was plastic with a Handel on it which prevented from gowning threw the head stock  turned dawn a length of broom Handel to 19 mm OD and their you have it

Title: Re: a wot not
Post by: DaveH on February 26, 2012, 06:23:26 PM

Bob,

Hey, Hey, Hey ........... a very clever idea  :clap: :clap: :clap:

 :beer:
DaveH

Title: Re: a wot not
Post by: mklotz on February 26, 2012, 06:33:04 PM

Along the same lines...

Go to your local gun shop and buy a cleaning mop for a 12 gauge shot gun.  Fit it to a handle and you've got a great mop for cleaning the taper on the tailstock.  The fuzzy material used for these mops has an almost magnetic attraction for swarf.

Title: Re: a wot not
Post by: krv3000 on February 26, 2012, 06:54:28 PM

HI well thanks for the tip but gun shops are a bit thin on the ground where i live as the brush was only £1 nothing to loos 

Title: Re: a wot not
Post by: Raggle on February 26, 2012, 07:02:01 PM

Don't let him kid you, Marv. Bob lives in border country. Never know what these reivers have got tucked away

http://en.wikipedia.org/wiki/Border_Reivers (http://en.wikipedia.org/wiki/Border_Reivers)

Ray

Title: Re: a wot not
Post by: krv3000 on February 28, 2012, 08:00:38 AM

lol