MadModder

The Craftmans Shop => Backyard Ballistics => Topic started by: No1_sonuk on June 18, 2011, 08:36:34 PM

Title: Flash suppressor vent cutter
Post by: No1_sonuk on June 18, 2011, 08:36:34 PM
Does anyone know a supplier of the cutters for flash suppressor vents?

What I'm after is for the vents in the attached photo (it's an M16A1 flash suppressor).  It looks like it's a trapezoidal section.

While I can buy the particular part I want to make, there are others that aren't available.

Thanks
Title: Re: Flash suppressor vent cutter
Post by: Rob.Wilson on June 19, 2011, 01:08:50 PM
Hi Tim

You could use a Gear cutter ,, #1  ,, that would be used for cutting a rack .  Just need the match the shape to the nearest DP cutter .

Rob
Title: Re: Flash suppressor vent cutter
Post by: No1_sonuk on June 19, 2011, 01:22:19 PM
Good idea.  Hadn't thought of that.  :thumbup: