MadModder

Home Base => Introductions => Topic started by: Brian Rupnow on August 01, 2014, 04:18:24 PM

Title: Returning member
Post by: Brian Rupnow on August 01, 2014, 04:18:24 PM

Hi Folks. I was a member on this forum quite some time ago, but didn't post a lot. I am a retired design engineer, and have been designing/building model steam and i.c. engines for about six years now. I have successfully built and ran seven steam engines and seven i.c. engines, and am currently designing a 1" bore side valve gasoline  engine that can (hopefully) be built from bar stock. I hope to be a good contributing member to the forum.---Brian Rupnow

Title: Re: Returning member
Post by: doubleboost on August 01, 2014, 04:32:47 PM

Welcome Back
Brian  :thumbup: :thumbup:
John

Title: Re: Returning member
Post by: Brass_Machine on August 01, 2014, 05:14:50 PM

Welcome back to the collective :borg:

Look forward to what you have going on.

Eric

Title: Re: Returning member
Post by: Stilldrillin on August 01, 2014, 06:05:49 PM

Hello Brian.  :wave:

Nice to see you again. 

Looking forward to seeing your latest build.  :thumbup:

David D

Title: Re: Returning member
Post by: Artie on August 01, 2014, 09:13:38 PM

Ullo Brian, its been a while.... looking forward to your offerings....

Title: Re: Returning member
Post by: dsquire on August 01, 2014, 10:08:26 PM

Hi Brian

Welcome back Brian.  :thumbup:

I'm just down the road from you in Kitchener. Lived in Newmarket and worked at Office Specialty as a draftsman in the 60's.

Look forward too hearing some more of your stories. I'm sure that every one will want to see some pictures of that yellow hot rod of yours.  :D :)

Cheers  :beer:

Don

Title: Re: Returning member
Post by: tekfab on August 02, 2014, 06:34:54 AM

Welcome back Brian,  I've followed your exploits on other sites and one of these days I'm going to attempt to make one of your clocks  (the easy one !)

Mike

Title: Re: Returning member
Post by: Meldonmech on August 02, 2014, 06:43:18 AM

Hi Brian

                 Welcome back, I have seen many of your interesting contributions on other forums and look forward to your future posts on this forum again.
                                                        Cheers  David

Title: Re: Returning member
Post by: Brian Rupnow on August 02, 2014, 09:31:39 AM

Tekfab--You may have me confused with someone else. I have never built a clock.---Brian

Title: Re: Returning member
Post by: krv3000 on August 04, 2014, 09:38:21 AM

hi and welcume