MadModder

Home Base => Introductions => Topic started by: cowasaki on September 15, 2017, 04:19:01 PM

Title: Hello
Post by: cowasaki on September 15, 2017, 04:19:01 PM
Well I've been making stuff for years with my main area/interest being electronics/electrical/software/computers but I also get involved in the metal & wood required to actually make things that do something. I have a bit of a workshop at the moment able to make circuit board, solder, surface mount plus being a Landrover Defender person I've had to repair/weld/bulid stuff for that.  Metal work wise I have a MIG welder, pillar drill, bench grinder, band saw & pipe bender plus all the normal hand tools etc but I'm hoping to buy a lathe and mill around Christmas
Title: Re: Hello
Post by: krv3000 on September 15, 2017, 06:26:48 PM
hi and welcome
Title: Re: Hello
Post by: SwarfnStuff on September 16, 2017, 01:19:06 AM
G'Day and welcome to the madhouse. I'm sure you will enjoy hanging out here - I do anyway.
John B
Title: Re: Hello
Post by: marcusthehat on September 16, 2017, 04:45:51 AM
Hi Cowaski,

I presume you are aware of the main difference between a Landrover Defender and a Mercedes "G" Wagen?

The "G" Wagen keeps the oil in and the water out!

BOOM BOOM

 marcusthehat

Title: Re: Hello
Post by: cowasaki on September 16, 2017, 09:23:37 AM
Hi Cowaski,

I presume you are aware of the main difference between a Landrover Defender and a Mercedes "G" Wagen?

The "G" Wagen keeps the oil in and the water out!

BOOM BOOM

 marcusthehat

It saves doing oil changes, you just keep topping it up......
Title: Re: Hello
Post by: Biggles on September 22, 2017, 01:00:43 AM
Welcome Cowaski.  :coffee: