MadModder
Home Base => Introductions => Topic started by: Charles on April 26, 2017, 03:45:22 PM
-
Hi all,
Ive been lurking here for a couple of years now so thought i ought to show my face.
I found the forum when i was thinking about buying myself a lathe and stumbled across Andrews Traub rebuild thread - excellent reading, thanks Andrew!
I have a few current projects;
The ongoing renovation of an old wooden sailing yacht, Currently working on a new bowsprit after last winters gales destroyed the old one
Building an FRP composite sea kayak
Converting my milling machine to CNC
& if our house purchase goes through, building a new workshop
I'll try and share a few of these as they progress, hopefully someone will find it interesting
-
Charles welcome to the forum, good to have you pop your head above the gunwale :thumbup:
I used to live in Southampton myself - where abouts are you?
-
In Eastleigh at the moment, The new house is in Petersfield, so will be moving that way in a couple of months if all goes well...
-
Hi Charles! :wave:
Welcome to the collective :borg:
So.... I want to hear about the FRP sea kayak. I have been debating taking that plunge in a year or so myself.
Also, tell us about your CNC conversion!
Eric
-
Hi Eric,
The sea kayak is being built in a mold i acquired via eBay, not sure of the design, but about 17' long and quite high volume - which suits me at 6'2"
I built a very light polyester / chopped strand boat from it a couple of years ago which paddled beautifully but regrettably sank on the Solent during a trial paddle, however i did get enough paddling in to convince myself that the design & mold where worthwhile, so I am prepared to invest some better material in another boat
The mold is in 3 parts, a forward and after deck section, and a 1 piece hull. Progress so far is to make the two deck sections, Layup is: Polyester gel coat, then 200g CSM & 450g carbon bi-ax infused with epoxy. I've not been able to balance them on my scales, but i estimate about 5-6Kg total for the deck.
Hull will be Gel, 200g CSM, 300g e-glass twill, 3mm PVC foam, 300g e-glass twill. with some carbon UD down the center and along the gunnels. Biggest challenge with the hull is working out how to fit it into the garage, I've acquired a couple of extra machine tools since i built the last one...
Sorry no pictures, lost them when my last phone died
-
hi and welcome
-
hi welcome and keep us updated please on the kayak build.
Ian
-
In Eastleigh at the moment, The new house is in Petersfield, so will be moving that way in a couple of months if all goes well...
Welcome Charles, you'll find plenty varied participants here!
Hope you enjoy Petersfield - I did much of my Navigation training at HMS Mercury (Leydene / East Meon) - sadly closed now and training moved to SMOPS at Dryad.
Dave (IOM)
-
Hi and Welcome Charles. :wave: