MadModder

Home Base => Introductions => Topic started by: Pakrattuk on June 14, 2014, 01:13:14 PM

Title: Hello from pakrattuk
Post by: Pakrattuk on June 14, 2014, 01:13:14 PM

Hello all, been bitten by the machining bug again. Looking at upgrading my workshop so thought this forum looked like a good place to start. I've owned a small Emco compact 5 CNC lathe for a number of years but I'm now looking to upgrade the workshop with a Mill and possibly a larger lathe ( will probably keep the Emco as I can't bring my self to part with it). Hopefully might be able to make some sort contribution to the forum.
Thanks for having me as a member

Pakrattuk

Title: Re: Hello from pakrattuk
Post by: Jonfb64 on June 14, 2014, 04:59:27 PM

Hi and welcome :nrocks:

Jon

Title: Re: Hello from pakrattuk
Post by: krv3000 on June 14, 2014, 06:26:38 PM

Hi and welcome

Title: Re: Hello from pakrattuk
Post by: AussieJimG on June 14, 2014, 08:55:28 PM

Welcome Pakrattuk, it looks like you are off to a good start

Jim

Title: Re: Hello from pakrattuk
Post by: vtsteam on June 14, 2014, 11:13:40 PM

Hi Patrattuk, welcome to te forum!  :beer: