MadModder
Gallery, Projects and General => Gallery => Topic started by: DeanDK on May 10, 2017, 09:03:47 AM
-
So I needed to make some small/unique lathe tools for the watchmakers lathe.
I used precision ground flat stock/gauge plate. They actually turned out better than I had expected.
I shaped them using basic hand saw and hand files.
Was really only for brass, however, I made a tool for steel and turned silver steel quite well.
Very happy with them. Anyone else ever tried this?
-
Hi Dean, I make my own tools from silver steel and oil harden them. They are used a lot for the plastic components I machine, but they also work for brass and alloy parts too. I do however lap them on a leather wheel with oil and metal polish. I also keep a fine diamond stone handy to dress the tools as needed during use. Enjoy your videos too.
:thumbup:
-
That is interesting! Do you use silver steel rod or do they come in square too?
Nice I envy highly finished tools!
I was really impressed with how these tools turned out, and so easy to shape. I was guessing that is how they were back in the day before HSS?
Thanks Joules :thumbup: :D
-
I machine from silver steel rod, then hand figure depending on whats needed. If its a form tool I will drill through the rod and work round the hole to form a radius tool, or more holes for something more complex. I use silver steel as it's what I have to hand, not got any gauge plate. I make press tools from silver steel to use in the arbour press, and they are oil hardened.
(http://i.imgur.com/VktXSfB.jpg)
A little off topic, but the tools are machined and oil hardened (10W-30 motor oil). I take stainless tig wire and heat to red let it cool naturally so its soft. I can roughly bend the shape with my fingers then size the ring in the press tool, that helps work harden the ring a little. It's used in some bespoke parts I make and sell. I do a batch of 25 rings at a time, the tool has made a few hundred parts now. So you're not just limited to lathe tools.
-
Nice video thanks!
-
What you Brits call silver steel is called tool steel here in the States. It (here, at least) is available in rounds, square, and rectangular shapes with fair distribution.
-
I machine from silver steel rod, then hand figure depending on whats needed. If its a form tool I will drill through the rod and work round the hole to form a radius tool, or more holes for something more complex. I use silver steel as it's what I have to hand, not got any gauge plate. I make press tools from silver steel to use in the arbour press, and they are oil hardened.
A little off topic, but the tools are machined and oil hardened (10W-30 motor oil). I take stainless tig wire and heat to red let it cool naturally so its soft. I can roughly bend the shape with my fingers then size the ring in the press tool, that helps work harden the ring a little. It's used in some bespoke parts I make and sell. I do a batch of 25 rings at a time, the tool has made a few hundred parts now. So you're not just limited to lathe tools.
:thumbup: That is great. I believe that will come in handy for me in the not so distance future for making other tools. Thanks for sharing
Nice video thanks!
Thanks man
What you Brits call silver steel is called tool steel here in the States. It (here, at least) is available in rounds, square, and rectangular shapes with fair distribution.
I'm in Australia and call it Silver Steel, but we are the Brits criminal cousins haha..
Interesting, do you also call it drill rod as well? I actually thought it was. Well that is what I have been describing it in the past :doh:
-
Interesting, do you also call it drill rod as well? I actually thought it was. Well that is what I have been describing it in the past :doh:
Here in the States, at least, drill rod is round bar tool steel.
-
So what do you make square drills from Lew :lol:
-
So what do you make square drills from Lew :lol:
Square may be a little hard, but flat stock is used to make drills. Holtzopffel's five volumes (http://holtzapffel.org/publications.html) show the tools in use in the 1800's.
-
So what do you make square drills from Lew :lol:
Regardless of the use, I call-out and order it as tool steel (per AISI specification.
-
DeanDK, drill rod is called drill rod here, too. :beer:
-
On the drawings I see daily, it's referred to as O1. There are tool steels with other designations that we use as well: A2, D2, H13. Of course, everyone here also knows that when you say "Drill Rod", you're generally meaning O1.
O1 is common and readily available in lots of different shapes here. It isn't the nicest stuff to harden with a torch, as it has the tendency to warp after quenching even if you're careful. This may be fixed with tempering, but for our uses we don't bother with that step. I've noticed a very slight size increase after hardening most of the time, but this wouldn't be of concern in a cutting tool.
-
Drill rod is drill rod. It is round and comes in oil hardening and water hardening varieties.
I've ordered and used lots of water hardening drill rod over the last 15 years, and have plenty on hand now..
-
Drill rod is drill rod. It is round and comes in oil hardening and water hardening varieties.
It also comes in Air Hardening varieties (including Shock Resisting).