MadModder
Gallery, Projects and General => The Design Shop => Topic started by: NickG on September 22, 2009, 07:11:23 PM
-
Hi all,
Not sure whether this is the right place for these. I've tweaked all the drawings for my rocking engine in line with my findings so am posting on here incase anybody else wants a go or even just for info or any ideas. They need to be attached really as would be too little on photobucket, they are only circa 80k each though.
Cheers,
Nick
-
Next ones
-
and the rest
-
thanks you very much for the plans nick :thumbup: :thumbup: ..............it is now on my list of things to make :dremel: ...............oh boy is that a long list :doh:
thanks again
chuck :wave:
-
Nice set of plans Nick:- very clear
:beer:
Stew
-
Cheers,
I'd get a slating if I showed these to the lads at work .. they'd have red pen all over them, but they're probably good enough for us. If anybody does pick them up one day and sees anything I've missed, let me know!
Nick
-
Nick
I've found with drawings like a lot of things in life that are open to interpertation, you'll always find someone who'll say they are wrong, if you're happy with them then they a right. :thumbup:
A Darn good job :thumbup:
Stew
-
Nice job Nick.
I have compiled all your files into one PDF file so it is a lot easier to download.
John
-
Thanks John, will save that myself, I don't have the software for that, I don't think!
-
Nick,
You can download a free Adobe Reader, just do a search on the net.
John
-
John,
I've got the reader but I don't think that allows you to compile stuff like you did does it? Did you use adobe full version?
Nick
-
Sorry about that Nick, I thought you just wanted to read it.
I run the full version of Adobe Acrobat 8 Pro, and it allows you to do almost anything to any document or picture. About 10 seconds to compile those into one file. But you can get PDF file compilers on the net to do just that one job.
John