MadModder

Home Base => Introductions => Topic started by: Peter Cordell on April 05, 2017, 03:44:10 PM

Title: Hi all
Post by: Peter Cordell on April 05, 2017, 03:44:10 PM
I have recently acquired a lathe, or two, seem to have grown to three now.

Which is a little company for my mini mill and grinder.  Did I mention the shaper, another must have item.

All this has given me a good excuse to turn perfectly good metal into swarf.



Title: Re: Hi all
Post by: awemawson on April 05, 2017, 04:22:54 PM
Hi Ben, welcome to the forum   :wave:

I see from your other posting that you might join us on the Scraping Course in December at my place - that would be good  :thumbup:
Title: Re: Hi all
Post by: mexican jon on April 05, 2017, 04:43:59 PM
 :wave: :wave: Hi Ben
Title: Re: Hi all
Post by: krv3000 on April 05, 2017, 06:54:17 PM
Welcome a board David
Title: Re: Hi all
Post by: Biggles on April 06, 2017, 12:00:02 AM
Welcome Ben.  :wave:
Title: Re: Hi all
Post by: Peter Cordell on April 06, 2017, 02:42:45 AM
Thanks for the welcome Andrew,jon,David ,Biggles

Andrew yes really looking forward to this

Ben
Title: Re: Hi all
Post by: howsitwork? on April 11, 2017, 07:13:56 AM
Hi Ben

welcome from Yorkshire! Sadly December's too crowded for me already so I'll have to listen to you all getting blisters etc :drool:

Ian