MadModder
Home Base => Introductions => Topic started by: oxocube on December 02, 2017, 09:54:20 AM
-
Hello to everyone and thanks for the add. I am a retired cabinetmaker and budding engineer, I have had many lathes over the years and have recently obtained for little money a Mashtroy Troyan C210T (Warco 220) that apart from flaking paint work on the stand looks like new. I am a life long biker and have several heavy cruisers that i customize and that is where the lathe comes in handy. I hope i can pick up some tips and advise on here and maybe pass some on. Regards Bill.
-
Hi Bill
Welcome to MadModder, there are many motorcyclist who contribute to the Forum. We look forward to seeing
some of the cruisers you have customised.
Cheers David
-
Hi and Welcome Bill.
-
hi and welcome