MadModder

The Shop => Metal Stuff => Topic started by: doubleboost on October 01, 2014, 03:07:02 PM

Title: Wheels for a Lister engine trolly
Post by: doubleboost on October 01, 2014, 03:07:02 PM

Hi
Lads
Made a start on some wheels
The rim is part of a discarded Oxy bottle




(http://i261.photobucket.com/albums/ii63/john970s0/LISTER/10-01-2014_131254_zpsbcdf22d5.jpg) (http://s261.photobucket.com/user/john970s0/media/LISTER/10-01-2014_131254_zpsbcdf22d5.jpg.html)




(http://i261.photobucket.com/albums/ii63/john970s0/LISTER/10-01-2014_180327_zps8f6701dc.jpg) (http://s261.photobucket.com/user/john970s0/media/LISTER/10-01-2014_180327_zps8f6701dc.jpg.html)




(http://i261.photobucket.com/albums/ii63/john970s0/LISTER/10-01-2014_175514_zps6e9f8cb8.jpg) (http://s261.photobucket.com/user/john970s0/media/LISTER/10-01-2014_175514_zps6e9f8cb8.jpg.html)




(http://i261.photobucket.com/albums/ii63/john970s0/LISTER/10-01-2014_182435_zps7d214721.jpg) (http://s261.photobucket.com/user/john970s0/media/LISTER/10-01-2014_182435_zps7d214721.jpg.html)




This will be the inside

A bit of "decoration" will be given to the outside spokes

John

Title: Re: Wheels for a Lister engine trolly
Post by: John Rudd on October 01, 2014, 03:58:06 PM

Oh yes!...... :thumbup:

I could do with some of those (4) for my Petter A1 I'm restoring..... :dremel:
Hmmm need to look for scrap oxy bot..... :D

Title: Re: Wheels for a Lister engine trolly
Post by: Pete W. on October 01, 2014, 04:18:36 PM

Hi there, John,

Those slices of oxygen cylinder look very neat.  Did you clean up the cut edges or do you have some super-precise cutting machine? 

Title: Re: Wheels for a Lister engine trolly
Post by: krv3000 on October 01, 2014, 04:21:11 PM

brill john i sed they wood look good

Title: Re: Wheels for a Lister engine trolly
Post by: Stilldrillin on October 01, 2014, 05:40:17 PM

Now....... That's cute!  :thumbup: :clap: :clap:

David D

Title: Re: Wheels for a Lister engine trolly
Post by: doubleboost on October 01, 2014, 05:58:16 PM

Pete
Mick cut them for me on his big band saw
Cleaned up with a angle grinder
The cut finish was very good  :drool: :drool: :drool: :drool:
John

Title: Re: Wheels for a Lister engine trolly
Post by: micktoon on October 01, 2014, 07:15:44 PM

 Looking nice John , they should look a good match for the engine once done. That big bandsaw is just the job for such tasks  :thumbup: glad I could help out.

 Cheers Mick

Title: Re: Wheels for a Lister engine trolly
Post by: dickda1 on January 02, 2015, 06:13:25 PM

Very nice!