MadModder

The Craftmans Shop => Model Engineering => Topic started by: naffsharpe (Nathan) on January 01, 2012, 05:35:32 PM

Title: Side beam engine
Post by: naffsharpe (Nathan) on January 01, 2012, 05:35:32 PM
Hi, I found Tels post on this engine and was intending to ask a few questions about it but at more than 120 days since last post I thought it may not be read. Tel did you finish it and any chance of a photo or two ? I was really impressed at how elegant you made it look around the valve gear, much better than the original. I,d already decided to build it at either 1.5 or 2 x scale and would love to see how it turned out. Many thanks. Naff (nathan).
Title: Re: Side beam engine
Post by: Rob.Wilson on January 01, 2012, 06:05:23 PM
Hi Nathan

The post would have been read , it would get bummed to the top  :thumbup: 

You may wish  to have a look over here at Tel's build log of the engine http://www.homemodelenginemachinist.com/index.php?topic=6749.0



Rob
Title: Re: Side beam engine
Post by: naffsharpe (Nathan) on January 01, 2012, 06:25:03 PM
Thanks Rob, You're a gent.
Title: Re: Side beam engine
Post by: Rob.Wilson on January 01, 2012, 06:29:43 PM
Glad to help Nathan

 and welcome to Madmodders  :wave:  hope we get to see your engine build  :poke: :)


Rob