MadModder
Gallery, Projects and General => Neat Stuff => Topic started by: AdeV on April 17, 2012, 09:38:17 AM
-
... no, really!
http://makeprojects.com/Project/The-Multimachine-150-12-Inch-Swing-Metal-Lathe-Mill-Drill/1751/1
Interesting stuff... a DIY lathe made from concrete for ~$150. Make it big enough and it will be just as immovable as a real cast iron one!
-
So... When do you start Ade? :dremel:
:thumbup:
Nice little find! Dunno if I'll try it though?
Ralph.
-
So... When do you start Ade? :dremel:
:thumbup:
Nice little find! Dunno if I'll try it though?
Hehe - not yet Ralph, I've already got more projects than time.... and given your recent op I think you might be better using something a little lighter than concrete?
-
we've all got more projects than time chief! :proj:
but you're right about the weight! :lol:
Still, interesting all the same :thumbup:
Ralph.
-
Hmmm...
I see a rendered 3D CAD model but no concrete lathe :scratch:
Has anyone actually made one of these?
-
Bill,
There is a photo of one here: http://groups.yahoo.com/group/multimachine/
The design is adapted from a very successful WW1 concrete lathe.
-
Bill,
There is a photo of one here: http://groups.yahoo.com/group/multimachine/
The design is adapted from a very successful WW1 concrete lathe.
That looks like a 3d render to me :scratch:
-
That looks like a 3d render to me :scratch:
Hmm, you could be right.
It's a damn good render if it is one.
-
It is a render. You can see the faceting on the pulley at the left.