MadModder
Gallery, Projects and General => Project Logs => Topic started by: krv3000 on March 16, 2013, 08:55:33 PM
-
hi all went over johns today to drop sum things off and micktoon popt in with his skull and he had bin given a D.T.I that needed my loving touch it looked to be in good order from the outside but on the inside it was a mess sum one had had a go at fixing it but made things worse the mane folt with it was corrosion in the slide guides ie the bit that the center rod goes up and dawn in but they had managed to damage the rack and brake two pivots of the end of two gear wheels i sorted them out by removing me chuck and fitting in a drill chuck in me head stock that wood hold them for drilling i used me smallest center drill then drilled the end with a 0.75 mm drill on both of them then i made two new pivots out of a needle then soft soldered them in place gave Avery thing a good clean and ha presto one working D.T.I right pics
-
Yet another nice fix, Bob :clap:
Have you thought of watch repairs as a lucrative hobby?
Andy
-
Totally impressed with the stuff you do! :bow:
:mmr:
-
That's crazy stuff!! :jaw: Nice job.
-
Bob ,
You are the expert with the DTI's for sure :bow: :bow: :D I had been going to PM you to say no real hurry for it anyway ...........but you had already fixed it when I logged on ! :) :clap: ..... if only everything in England worked as well as you , the country would be in a much better state :clap: :clap:
Another bit of good kit saved from the bin by Bob's magic fingers :med:
Thanks Bob ,
Cheers :beer: Mick
-
Hi Bob,
A neat fix, well modded.
Cheers David
-
thanks all for the coments i have fixt up sum old car wind up clocks and a poket watch thats a bawt it im after a good poket watch to replase the one that was stolen sum time a go it was ownd by my grandfarther i keep seeing them for sale on the bay but i don't fancy sheling out a lump of cash that ma never work a gane i went to a pornbrokers not long a go to see if i cud by one the ancer was no they scrap them off he oferd me a box of movments but with out the cace wots the pont any way i will post a pic of the dti in its new box soon
-
:clap: :clap: :clap: :clap: nice going Bob :thumbup:
Rob
-
The one you did for me is working fine
Nice and warm in its new box :bow:
John
-
nice to no that its being used and is working well
-
well done bob.nice to see things being fixed,and not junked.
-
hi as promist in its new home
-
That is spot on Bob :bow: :bow:, a job well done indeed :clap: , thanks mate, I did not think the DTI would fix , never mind a box too :drool:, :beer: Cheers Mick