MadModder
Gallery, Projects and General => The Design Shop => Topic started by: ozzie46 on August 13, 2012, 01:44:20 PM
-
I have a worm gear set with a 30 tooth driven gear, would this be ok to make a Indexing Dividing Head? :dremel:
I need all gthe help I can get on this as math and I don't get along well. :zap: :zap:
Ron
-
Ron;
Tony Jeffree used 30:1 reduction on his Taig Dividing Head;
http://www.jeffree.co.uk/pages/divheadmk1.html
Cheers Garry
-
Thanks Garry, I'm in thed process of reading it now.
Ron