Recent Posts

Pages: 1 ... 3 4 [5] 6 7 ... 10
41
Project Logs / Re: Steady for Harrison
« Last post by shipto on March 23, 2024, 08:23:39 AM »
Progress so far: I have made the brass holders and all thats left to do on them is to bore the end once I have the brass which I forgot to pick up on friday  :doh: then work out how I make the adjusters. I am thinking that the end caps might do double duty but not decided yet.
42
Our Shop / Re: My cubbyhole
« Last post by vtsteam on March 22, 2024, 03:14:38 PM »
Nice!  :thumbup: :thumbup: :beer:
43
Our Shop / Re: out with the old in with the new
« Last post by vtsteam on March 22, 2024, 03:03:55 PM »
The shop looks great, Bob!  :thumbup: :thumbup: :clap: I don't blame you re. waiting for good weather. Same here..... :beer:
44
Project Logs / Re: Steady for Harrison
« Last post by vtsteam on March 22, 2024, 02:56:45 PM »
That does look nice!  :thumbup: :thumbup: :beer:
45
Electronics & IC Programing / Re: Pi PICO DRO/Quill-Knee combiner
« Last post by BillTodd on March 21, 2024, 11:01:50 AM »
Quote from: JamesC on March 21, 2024, 07:38:33 AM
Hope it is gone for good,


It made a brief return at the weekend - apparently buzzing around my head in a small jet engined vehicle  . I feel ok at the moment.

Quote
We have the 'upgrade for your convenience' of the M27 to look forward to. One of the diversion routes is past our front door.  :hammer:

James
You have my deepest sympathy  -  I know some of the locals had the trucks from Felixstow and Harwich trundling past the home in the early hours when they closed the main road -  It would caused nightmares ... had they been able to sleep.

Luckily I've had the demon to keep me company while the A12 work is progressing - It didn't wake me last-night - I'm hoping the trend continues...

46
Electronics & IC Programing / Re: Pi PICO DRO/Quill-Knee combiner
« Last post by JamesC on March 21, 2024, 07:38:33 AM »
Hope it is gone for good,

We have the 'upgrade for your convenience' of the M27 to look forward to. One of the diversion routes is past our front door.  :hammer:

James
47
Member Videos / powerful metal saw machine
« Last post by celsoari on March 20, 2024, 05:23:21 PM »
After having the channel stopped for a while, I return with a video of a metal sawing machine rescued from scrap metal

​

i=5mVDQ7pRU1pjmSZt


Greetings from Brazil


Celso Ari
48
How to's / Re: Circlip groove
« Last post by ddmckee54 on March 20, 2024, 11:16:17 AM »
Used carbide drill bits with a 1/8" shank can be had off Ebay for less than a buck a piece.  These can be used to make a variety of small tools, both external tools and internal.
49
How to's / Re: Circlip groove
« Last post by Joules on March 20, 2024, 01:50:23 AM »
Nice insert Bill, that's given me ideas for my own tooling cut from hacksaw blade.  Times like this I wish I had an EDM machine  :thumbup:
50
How to's / Re: Circlip groove
« Last post by BillTodd on March 19, 2024, 06:14:58 PM »
Side on it's triangular with a hole in the middle.

Ideally it needs to sit in a V open at the bottom . It's not difficult to make if you have a mill.
Pages: 1 ... 3 4 [5] 6 7 ... 10