MadModder

Home Base => Introductions => Topic started by: JohanVanRensburg on January 17, 2017, 02:20:12 PM

Title: Greetings
Post by: JohanVanRensburg on January 17, 2017, 02:20:12 PM
Hello to all of you. I have just joined :clap:. I am a novice when it comes to lathes and milling machines. I have a MyFord ML7 lathe (slightly older than I am) and a Chinese milling machine. I have just fitted a DRO to the lathe and am in the process of doing the same to the mill (although this is a bit more challenging).
I am looking forward to learning a lot from all the learned member here :headbang:
Title: Re: Greetings
Post by: DavidA on January 17, 2017, 04:02:06 PM
Hi Johan,

Nice to have you here.

Lots to be learned here, even if we can't always agree on what is the correct way of doing things.

Dave.

DavidA
Title: Re: Greetings
Post by: krv3000 on January 17, 2017, 05:03:06 PM
hi and welcume
Title: Re: Greetings
Post by: howsitwork? on January 17, 2017, 05:11:02 PM
WELCOME AND enjoy the chat
Title: Re: Greetings
Post by: Biggles on January 19, 2017, 01:49:46 PM
Hi and Welcome to the asylum Johan .  :hammer: :zap: :whip:
Title: Re: Greetings
Post by: awemawson on February 20, 2017, 04:23:35 AM
Happy to have you on board Johan  :thumbup:

Lots of help and advice here - you just need to ask