MadModder

The Breakroom => The Water Cooler => Topic started by: AdeV on October 31, 2017, 07:12:56 AM

Title: Insert tooling screws
Post by: AdeV on October 31, 2017, 07:12:56 AM
Does anyone know of an alternative source for screws suitable for holding inserts into Glanze tooling?

e.g. see the bottom of this page: https://www.glanze.co.uk/acatalog/Replacement_Inserts___Spares.html

£2 each (and no multipacks available at a reasonable price), well, Dick Turpin would have been proud... I've lost about 1/2 dozen of these over the years, would like to buy a bag of about 20, but not for £48!
Title: Re: Insert tooling screws
Post by: charadam on October 31, 2017, 08:54:20 AM
Here you go:

https://www.ebay.co.uk/i/142181992490?chn=ps&dispItem=1&adgroupid=41767405657&rlsatarget=pla-327666169589&abcId=1129006&adtype=pla&merchantid=114922617&poi=&googleloc=1006940&device=c&campaignid=861364981&crdt=0
Title: Re: Insert tooling screws
Post by: AdeV on October 31, 2017, 09:32:19 AM
Good spot, thanks!

Out of stock of the M2.5, unfortunately  :(

I did find a load on AliExpress - $8.77 (delivered) for a bag of 100; I figured it was worth the risk, shame about the 20-40 days postage.... hopefully they won't take that long. I'll have a few spares left over from that batch, if they fit, which I'll be happy to pass on in smaller numbers if anyone needs spares.  :thumbup:
Title: Re: Insert tooling screws
Post by: AdeV on November 08, 2017, 03:26:37 AM
Much to my surprise, my bag of Chinesium screws arrived yesterday  :clap: so this morning I popped down the shed to see if they worked. And they do!  :beer:

Now all I have to do is locate the toolholders in my bomb site of a workshop, er, and make a stack of QCTP holders for them, and I'm good to go  :thumbup:

Anyway... now I have 100 of the little blighters... hopefully I'll never need that many, so if anyone needs a few to replenish their stock & doesn't fancy paying £2 each.... I'm happy to fire a few your way for the cost of postage. Just drop me a PM. I do intend to keep hold of some myself, so don't go asking for 50.... first come, first served... Oh, yeah, and it's worth asking before I lose them...

If you'd rather have your own bag of 100 for less than $9, here's the link (https://www.aliexpress.com/item/100pcs-lot-M2-5-6-Insert-Torx-Screw-Replaces-Carbide-Inserts-CNC-Accessories-Lathe-Tool-Blade/32461756128.html).
Title: Re: Insert tooling screws
Post by: mattinker on November 08, 2017, 04:12:21 AM
I'm going for a bag of my own, prolly cost less than postage to France!!
Title: Re: Insert tooling screws
Post by: AdeV on November 08, 2017, 08:39:52 AM
I'm going for a bag of my own, prolly cost less than postage to France!!

If you wait a few days, there'll be a 25% discount on them! I think they were on offer when I bought them, as they're slightly more expensive at the moment. Still MILES cheaper than any of the alternatives though!
Title: Re: Insert tooling screws
Post by: mattinker on November 08, 2017, 10:48:12 AM
I'm going for a bag of my own, prolly cost less than postage to France!!

If you wait a few days, there'll be a 25% discount on them! I think they were on offer when I bought them, as they're slightly more expensive at the moment. Still MILES cheaper than any of the alternatives though!

Thanks, will wait a couple of days!
Title: Re: Insert tooling screws
Post by: Spurry on November 11, 2017, 07:29:34 AM

If you wait a few days, there'll be a 25% discount on them! I think they were on offer when I bought them, as they're slightly more expensive at the moment. Still MILES cheaper than any of the alternatives though!
Thanks Ade, just ordered in the 11/11 sale.  :thumbup:
Pete